24
electrolux
Electrical connection/power supply
The oven must be connected to the electric-
ity supply by a designated electrician.
Use a H05VV-F type power cable or higher.
The appliance must be installed with a sock-
et supply line, otherwise the fixed home elec-
trical system must include an isolating device
with at least a 3mm-contact separation to
enable a simultaneous and all-pole cut off
from the mains, according to NIN 2000.
The customer must have a socket for the
electrical connection that is accessible and
outside the co-ordination room. A cable
length of approx. 120 cm must be provided
with lines connected direct to the mains.
1.
Opening the terminal box (
detail D
).
2.
Open the catch on the cord grip (
detail E
).
3.
See the connection diagram for the ter-
minal connection.
4.
Secure the cord grip by pressing firmly
on the catch (
detail F
).
5.
Closing the terminal box.
6.
Fix the connection cable into the holes
provided to prevent it rubbing against
the drawer (
detail G
).
1
In case of repair the appliance must
be switched off from the mains.
Installation diagram 400V
Phase definitions:
L1, L2, L3 (or R, S,T)
