Electrolux EFT 800, Руководство пользователя

Страница: 3 / 9

3
Description of the cooker hood
E
Fig. 1
Fig. 3
Fig. 4
1 2 3
O O I
1 2
3
4
5
The cooker hood
1. Light switch
2. Motor speed switch
3. Vapour catcher
4. Work light
5. Suction grid with grease filter
Accessories
The following are included with the cooker hood:
•
1 hood canopy (C) complete with controls, lighting and
fan motor.
• 1 flange Ø 120 mm and 1 cap
• Rawl plugs, screws, and documentation.
• 2 Carbon filters. The carbon filter is to be used when the
hood is connected to the recirculation mode.
Functions
There are two possible systems:
•
Extraction of air to outside using optional venting kit
and evacuation duct.
• Recirculation
Attention! The Cooker hood is ready to be used for
recirculation (carbon filter already mounted in place).
The cooker hood cannot be connected to flues of
other appliances that run on energy sources other
than electricity. Please, keep to the provisions of
official directives regarding the question of fumes
discharge.
Extraction
The appliance has two exhaust outlets; A and B (Fig. 2).
Important! To use the back hole B, remove the plastic cover
(Fig. 3) pulling tabs E , use a cutter or a sharp knife for a
precise work in order to free the back hole.
Connect the hood to the smoke exhaust duct by
using the connecting ring C (bayonet coupling).
Insert cap D in the unused exhaust hole (bayonet coupling).
Attention! In the horizontal runs the duct must be slightly
slanted (about 10°) and directed upwards to vent the air
easily from the room to the outside.
Recirculation
The air is filtered through a carbon filter and recirculated
into the room through the front grid (fig. 2 -4).
This version is used when there is no exhaust duct for
venting outdoors or when it is impossible to install one.
D
A
C
B
Fig. 2