background image

12

Operating Instructions

The appropriate drying temperature will auto-
matically be indicated for the cycle selected. To 
change the preset temperature, press the 

temp

 

button to scroll to the desired setting.

To protect your fabrics, not all temperatures are 
available with every cycle. If a temperature is not 
appropriate for the cycle, it cannot be selected 
and will not be lit by pressing the 

temp

 button.

With exception of 

sanitize

, the temperature select-

ed for the cycle will be remembered and recalled 
each time that cycle is selected in the future.

Follow the fabric care label instruc-
tions on items to be dried.

For best results

sanitize (on select models)

Recommended for durable fabrics and towels. 
Use this selection to remove harmful bacteria 
from your clothing or other items where sanitiza-
tion is desired.

This option will kill 99.9% of bacteria. A higher 
temperatures is required. Please check fabric 
care labels to prevent damage.

high

Recommended for most cotton fabrics.

normal

Recommended for wrinkle free, easy care, light-
weight fabrics and bulky loads.

low

Recommended for delicate fabrics.

air dry

This setting (no heat) should only be used with a 
time dry cycle to dry items containing feathers, 
down, foam rubber, plastics or rubber-like ma-
terials; to refresh clothing, stuff ed animal, pillows 
or blankets; and to dust draperies.

The appropriate dryness level will automati-
cally be indicated when the cycle is selected. 
To change the preset level, press the 

dry level

 

button to scroll to the degree of dryness desired.

To protect your fabrics, not all dryness levels 
are available with every cycle. If a dryness level 
is not appropriate for the cycle, it cannot be 
selected and will not be lit by pressing the 

dry 

level

 button.

The dryness level selected for the cycle will be 
remembered and recalled each time that cycle 
is selected in the future.

Select the 

normal

 dryness level for most Auto 

Dry cycles.

Occasionally a load may seem too damp or 
over-dried at the end of the cycle. To increase 
drying time for similar loads in the future, se-
lect 

high

 or 

max

 (on select models). For loads 

requiring less drying time, select 

less

.

Select 

damp

 for items you wish to partially dry 

before hanging or ironing.

Cycle Settings

Drying Temperature

Dryness Level (Auto Dry)

   

NOTE

To change the temperature once the cycle has 
begun, press the 

pause

 button, make the new 

selection and press 

start

 again.

   

NOTE

To change the dryness level once the cycle 
has begun, press the 

pause

 button, make the 

new selection and press 

start

 again.

Содержание EFME417SIW

























Отзывы: