13
Operating Instructions
Cycle Options
Suitable options will automatically be indicated
when the cycle is selected. To add an option,
press
options
until the indicator for the desired
option fl ashes, then press
set
. The indicator will
be illuminated when the option has been select-
ed. Follow the same steps to delete an option.
To protect your fabrics, not all options are avail-
able with every cycle. If an option is not avail-
able for a cycle, the indicator will not light.
Occasionally, two options or settings in the same
cycle will confl ict with each other, like
eco
op-
tion and
sanitize
temperature (on select models).
When this happens, the option selected fi rst will
cause the confl icting option to not be selectable.
extended tumble (on select models)
Select the
extended tumble
option if the dried
load might not be removed promptly at the end
of the cycle. The dried load will tumble continu-
ously without heat for 30 minutes. A chime will
sound periodically to remind you to remove the
dried load.
The
wrinkle release
option can be selected with
extended tumble
to increase the amount of time
the load will tumble without heat up to 75 minutes.
delay start
Use
delay start
to select a drying time conve-
nient to your schedule or during off -peak energy
hours. The start of any cycle can be delayed for
30 minutes to 12 hours. Scroll through the op-
tions to select the
delay start
option, press
set
and then to scroll to the delayed desired
time setting with the cycle selector. After choos-
ing the desired delay time, press
start
and the
delay time will begin counting down.
perfect steam
TM
The
perfect steam
TM
option injects steam
into the clothing prior to cool down to reduce
wrinkling, ironing and static cling.
NOTE
It is not recommended to use fabric softener
sheets with steam cycles or steam options as it
may cause staining on clothes.
NOTE
To change the options once the cycle has
begun, press the
pause
button, make the new
selections and press
start
again.
NOTE
While counting down during
delay start
, you
will notice your dryer periodically tumbling for
a few minutes without heat to redistribute the
load, maximizing load freshness.
anti-static (on select models)
The
anti-static
option injects steam into the
clothing just before cycle completion to reduce
static.
wrinkle release
The
wrinkle release
option helps prevent
wrinkles and tangling by tumbling the dry
load without heat for 5 minutes out of every 10
minutes. The 5 minutes on and 5 minutes off is
repeated for a total 45 minutes. A chime will
sound after every 5 minute tumble to remind you
to remove the dried load.
The
extended tumble
(if available) option can
be selected with
wrinkle release
to increase the
amount of time the load will tumble without heat
for up to 75 minutes.
lock
To lock the controls between cycles, scroll to
the
lock
option and press
set
. “ ” will be
displayed on the panel. To unlock the controls
scroll to the
lock
option and press
set.
Use
this feature to reduce the likelihood of acciden-
tal operation by children.
eco
The
eco
option reduces the drying temperature
a few degrees to save energy. In conjunction
with automatic moisture sensors, cycle times
will increase slightly, but overall energy usage
will decrease. The
symbol will be shown on
the center display to indicate the
eco
option is
activated.
