
46 electrolux.com.au
47
INSTALLATION OF EFEP955 & EFEP915
(CONTINUED)
Slot in Installation
To remove the appliance kick panel
•
Remove all loose parts i.e. burner crowns & caps,
trivets, and oven shelves.
•
Carefully lay down the appliance onto one side onto
foam packaging and remove the screws as shown
from each corner bracket.
Remove 4
screws on
each corner
bracket
Installation sequence for freestanding
or slot-in installation
•
Check that the required services are correctly
positioned (see electrical & gas services requirements).
•
Ensure cabinetry has the correct details.
•
Install anti-tilt brackets and chain hook or front stops
as appropriate.
•
Remove all packaging from cooker, remove all loose
parts i.e. trivets, burner crowns, oven shelves.
•
Remove plastic film from cooker.
•
Fit splashback to cooker.
•
Slide cooker into position to check fitment to anti-tilt
bracket. For freestanding installation, check the height
and level of the cooker. Adjust cooker feet as required.
•
Connect gas and electrical services.
•
Place into position.
•
Complete Certificate of Compliance.
Levelling the oven
Place a level in the oven as below making sure the level
sits on the front and rear forms.
✓
Cabinet construction for built-in installation
For the best integration within a kitchen, install this
appliance in a cupboard that gives a
flush fit
with the
surrounding cupboard fronts. A recess of
20mm is ideal.
The appliance may also be mounted in a
proud fit
configuration. This will push out the front of the product
from the cupboard front by 20mm.
NOTE 20mm slot at rear of oven in base.
Cleats to be a maximum of 100mm wide
Underbench installation
Your underbench oven looks best when the control panel
is directly under the benchtop. An upper infill panel may
be added if the cooktop placed above the benchtop is
too deep. *Refer to cooktop installation instructions for
required clearance between cooktop and oven.
Vertical cabinet installation
The oven can be built into a vertical cabinet in the same
manner as an underbench. The required cavity dimensions
are the same and the product is secured to the cabinet in
the same way.
For the best integration within a kitchen, install this
appliance in a cupboard that gives a flush fit with the
surrounding cupboard fronts. A recess of 20mm is ideal.
NOTE: Your appliance must be mounted on a horizontal
surface for the full width and depth of the product.
NOTE: A ventilation slot 20mm wide is required at the rear
of the base of the cabinet floor.
The cooker MUST be installed in compliance with:
•
Wiring connections in AS/NZS 3000 Wiring Rules.
•
Local regulations, municipal building codes and other
statutory regulations.
For New Zealand Only:
INSTALLATION OF EVEP916
NOTE: If a powerpoint is fitted it must be accessible with the
appliance installed.
900mm
600mm
580mm
*Refer to cooktop installation instructions for required
clearance between cooktop and oven.
876mm
Mounting holes
20mm
slot
100mm
max
*20mm
see note
below