42
INSTALLATION OF THE EFE956BA & EFE916BA
Slot in Installation
To remove the appliance kick panel
• Remove all loose parts i.e. burner crowns & caps,
trivets, and oven shelves.
• Carefully lay down the appliance onto one side onto
foam packaging and remove the screws as shown
from each corner bracket.
Installation sequence for freestanding
or slot-in installation
• Check that the required services are correctly
positioned (see electrical & gas services requirements).
• Ensure cabinetry has the correct details.
• Install anti-tilt brackets and chain hook or front stops
as appropriate.
• Remove all packaging from cooker, remove all loose
parts i.e. trivets, burner crowns, oven shelves.
• Remove plastic film from cooker.
• Fit splash back to cooker.
• Slide cooker into position to check fitment to anti-tilt
bracket. For freestanding installation, check the height
and level of the cooker. Adjust cooker feet as required.
• Connect gas and electrical services.
• Place into position.
• Complete Certificate of Compliance.
Remove 4 screws on
each corner bracket