10
BEFORE USING THE APPLIANCE - GAS HOB mODEL
Installing the burners and trivets
Installing the standard burners
1. The burner crown must be fitted correctly onto the
burner cup or damage will occur during operation.
2. To do this, align the outer hole and outer recess of
the burner crown around the spark plug and flame
safeguard sensor. Drop down ensuring the location
ribs on the bottom of the crown drop into the
location recesses.
3. The burner cap is simply positioned over the top of the
burner crown.
Installing the wok burners
1. The wok burner crowns must also be fitted correctly
onto the wok burner cups.
2. To do this, align the sausage shaped cutouts on the
burner crown with the sausage shaped cutouts on the
burner body. Drop down ensuring the centre location
pin of the crown has dropped into the corresponding
recess in the body.
3. The 2 burner caps are simply positioned over the top
of the burner crown.
Installing the trivets
1.
Position the 2 side trivets onto the hob first, ensuring the
2 corner location recesses are to the back of the hob.
2. Then position the middle trivet ensuring the trivet
fingers are aligned with the side trivet fingers.
3. Take care when placing the trivets onto the glass.
4. The wok support sits on top of the trivet above the
wok burner.
1
Side trivet
2
middle trivet
3
Wok support
4
Side trivet
5
Standard burner cap
6
Standard burner crown
7
Standard burner cup
8
Standard burner spark plug
9
Standard burner flame
safeguard sensor
10
Wok burner flame safeguard sensor
11
Wok burner spark plug
12
Wok burner inner cap
13
Wok burner outer cap
14
Wok burner crown
15
Wok burner body
NOTE: When the burners are correctly fitted they will sit
level on the hob.
10 11
9
8
1
2
3
4
7
12
13
14
15
6
5
