Electrolux EFC1060, Руководство пользователя

Страница: 12 / 52

12 www.electrolux.com
USE
The hood can be switched on pushing directly onto the requested speed without firstly
having to select 0/1 button.
Button Basic function Indicator lights
Dual Function
L
Press briefly to turn the lighting system on and off. Button off Lights off
Press and hold the button for 2 seconds to activate the light -
ing system in “courtesy light” mode. The lights are lit at a
reduced power of approximately 5W. This function can be
disabled by pressing the button once again for 2 seconds
or by pressing it briefly to switch to normal lighting mode.
Button lit Lights on
Button lit Courtesy light on
T1
Turns the motor off from whatever speed it is set to.
Button lit Motor active
Motor inactive
Press and hold the button for 3 seconds with all the loads
turned off (Motor and Lights), to turn the Activated Charcoal
Filter alarm on/off.
Button flashes twice
F
– Alarm On.
Button flashes once
F
– Alarm Off.
T2 Turns the motor on at speed one. Button on
T3
When pressed briefly, turns the motor on at speed two. Button on Speed two on
Press and hold the button for approximately 2” to turn the
Delay function on and off, that is to say to turn the appliance
off after a 20 minute delay. Suitable to complete elimination
of residual odours. Can be activated from the OFF position
and from speeds 1, 2, 3. Cannot be activated with Intensive
speed On.
B u t t o n s
f l a s h i n g
( T1 + T2 or T3
or T4 )
Delay functionActive
T4 Turns the motor on at speed three. Button on
T5
Turns the motor On and Off at Intensive speed for a timed
period of 5 minutes. At the end of the 5 minutes the ap -
pliance will automatically return to the speed that was set
before. If the appliance was turned off at the time of activa -
tion, at the end of the 5 minutes the system will return to
speed one.
Button on
F
Press and hold for 4 seconds to reset the filter alarm indica -
tor, shown by flashing of button
T1
. This procedure can only
be carried out with the motor off.
Button on
Signals the Metal Grease Filter satu -
ration alarm, indicating that it is nec -
essary to wash the filters. The alarm
is triggered after the Hood has been
in operation for 100 working hours.
Button
flashing
When this is activated, it signals the
Activated Charcoal Filter satura -
tion alarm, indicating that the filter
must be changed; the Metal Grease
Filters must also be washed. The
Activated Charcoal Filter saturation
alarm comes into operation after
the Hood has been working for 200
hours.