Problem
Possible cause
Remedy
The oven does not heat
up.
The automatic switch-off is
activated.
Refer to "Automatic switch-
off".
The oven does not heat
up.
The door is not closed cor‐
rectly.
Fully close the door.
The oven does not heat
up.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
The lamp does not oper‐
ate.
The lamp is defective.
Replace the lamp.
The display prompts to set
the Language.
There was a power cut lon‐
ger than 3 days.
Refer to "Before first use"
chapter.
The display prompts to set
the Language.
The demo mode is activa‐
ted.
Turn off demo mode in:
Menu / Basic Settings /
DEMO. Activation / deacti‐
vation code: 2468.
The display shows F111.
The plug of the core tem‐
perature sensor is not cor‐
rectly installed into the
socket.
Put the plug of the core
temperature sensor as far
as possible into the socket.
The display shows an error
code that is not in this ta‐
ble.
There is an electrical fault. • Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Steam and condensation
settle on the food and in
the cavity of the oven.
You left the dish in the
oven for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
www.electrolux.com
36
Содержание EB4SL40CN
Страница 1: ...EB4SL40CN EB4SL40SP EN Oven User Manual ...
Страница 40: ...www electrolux com shop 867343767 C 052018 ...