Electrolux DIVA, Руководство по обслуживанию

Страница: 46 / 48

46
13 QUICK GUIDE
USER OPTIONS : Every dishwasher with an EDW2500 control unit is equipped with an “Options” button:
Press options button repeatedly until the desired function appears on the display.
The table below contains a brief description of the special functions available to the user:
Option or
Function
Method of selection Method of activation Short description / Comment (See 4.3)
Buttons LCD Buttons LCD
Eco-drying
ECO-DRYING NO
(with flashing
NO
)
ECO-DRYING YES
(with flashing SI and symbol
steadily lit)
When button Options is pressed again ,
NO
begins flashing again and
the symbol disappears
Extra rinse
EXTRA RINSE NO
(with flashing
NO
)
EXTRA RINSE YES
(with flashing SI and symbol
steadily lit)
When button Options is pressed again ,
NO
begins flashing again and
the symbol disappears
Detergent
Normal Detergent
(with flashing
NORMAL)
DETERGENT 3IN1
(with flashing 3IN1 and symbol
steadily lit)
When button Options is pressed again,
BIO
begins flashing and the
relative symbol appears. When button Options is pressed again ,
NORMALE
begins flashing again and the symbol disappears
Rinse-aid
dispensing
RINSE-AID YES
(with flashing YES)
RINSE-AID NO
(with flashing NO
)
When button Options is pressed again ,
SI
begins flashing again
Water hardness
setting
HARDNESS 40-50 °T
(with flashing
40-50 °T
)
HARDNESS 51-64 °T
(with flashing 51-64 °T)
When button Options is pressed again , the new hardness value
flashes
Language
ENGLISH LANGUAGE
(with flashing
ENGLISH)
LANGUAGE ENGLISH
(with flashing
ENGLISH
)
When button Options is pressed again , the next available language
flashes
Buzzer
BUZZER VOLUME 1
(with flashing 1)
BUZZER VOLUME 2
(with flashing 2)
When button Options is pressed again , the new volume level flashes
Brightness
BRIGHTNESS 5
(with flashing 5)
BRIGHTNESS 6
(with flashing 6)
When button Options is pressed again , the new brightness level
flashes
Contrast
Options
CONTRAST 5
(with flashing 5)
Otpions
(1)
CONTRAST 6
(with flashing 6)
When button Options is pressed again , the new contrast level flashes
Press OK/START button to confirm the selection.
If “Cancel” button is pressed repeatedly without confirming a choice, the system will exit the diagnostic mode and enter the cycle selection mode. When this occurs, no
programming parameter is changed.
If “Cancel” button is pressed for at least 6 seconds the default settings of language, volume, contrast and brightness are reset.
(1) When button
Options is pressed repeatedly, the selections available for the option under consideration appear in sequence.
NB: No “user” functions can be selected if a washing cycle has been selected (the unit must be in the pre-selection mode).