20
Programming and Configuration Manual
4.7.1.9
STATUS MENU
Set the desired function for the sub-menu
STATUS MENU
in the
PROCESS MENU
in the user interface.
ON
= It is possible to activate
STATUS MENU
during the time set in
PROCESS MENU
.
OFF
= The sub-menu will not be displayed in the
PROCESS MENU
.
REGRET TIME
= It is possible to activate
STATUS MENU
during the time set in
REGRET TIME
.
4.7.1.10 SHOW°C
Set if all the temperature values shall be displayed in °C or °F.
YES
= Displayed in °C
NO
= Displayed in °F
4.7.1.11 DELAYED START
Set the desired function for the
DELAYED START
menu. When the time is set for the
DELAYED START
in the user in-
terface, the time is acting on one of the following parameters:
OFF
= Inactive
START DELAY
= The program will start after the set time.
READY
= The program will be ready at the set time.
STARTS
= The program will start at the set time.
Example: If
READY
is set and in user interface the time is set to 12.00, the program will be ready at 12.00.
4.7.1.12 DELAY STEP TIME
Set the step time that is used when setting the time in the user interface for delayed start.
The time is set in minutes.
4.7.1.13 SERVICE VIA KNOB
Set the level for accessability to the service menu through the control knob.
0 = No access through the control knob.
1 = Access through the control knob.
2 = User password is needed to get access.
3 = ELS password is needed to get access.
When activating the service menu throught the control knob, the machine needs to be in idle position. (Not all of the
menus will be available).
The control knob shall be pressed as long as the time set in
LONG PRESS TIME LIMIT
to get acces to the service
menu.
Default settings are depending on market/segment.
4.7.1.14 TIMEOUT, DISPLAY
Set the time after which the machine should reset a program selection that has not started.
The time can be set in hours, minutes and seconds.
The pre-set value is 1 minute.
4.7.1.15 LAST. PROG. TIMEOUT
Set the time that the last program used in the machine will be listed on top of the program list after program end and
door has been opened.
The time can be set in minutes and seconds.
4.7.1.16 DEFAULT LANGUAGE
Set the language to be shown when the machine is started. (The available languages are shown in a list). The pro-
gam unit will return to this language if the machine is not used during the period specified in the
LANGUAGE TIMEOUT
menu.
When no default language is pre-set from factory, at first power up, the operator will be forced to select default
language.
Содержание Compass Pro
Страница 2: ......
