Electrolux Compass Pro, Руководство по программированию и настройке

Страница: 14 / 52

14
Programming and Configuration Manual
4.1.2 SECOND LANGUAGE
Second language is only possible on some markets and segments.
Set the language to be shown as the second language.
The second language will be displayed in the user interface when machine is idle position and during running mode.
4.1.3 LANGUAGE TIMEOUT
Set the time after which an unused machine should return to the default language and return to the program
selection.
The time can be set in minutes and seconds.
The pre-set value is 2 minutes.
4.1.4 ALLOW LANGUAGE CHANGE
Set if language change is allowed or not in the user interface.
YES
= Language change is allowed
NO
= Language change is not allowed
4.2 TIME/DATE
Activate the
TIME/DATE
menu.
The display will now show the following submenus:
•
TIME/DATE
•
SET TIME
•
SET DATE
•
24 HOURS DISPLAY
•
DAYLIGHT SAVING TIME
General for all parameters/settings/values:
Save = Long press
Edit = Turn/Press
Exit = Long press/Double press
If there is a changeable value, the lowest and highest values that can be set are listed below the changeable value.
4.2.1 TIME/DATE
Select to view actual time in the machine.
4.2.2 SET TIME
Set the correct time for the internal RTC clock.
4.2.3 SET DATE
Set the correct date for the internal RTC clock. Start by setting the year.
• Set the year. Exit to continue with a long press on the control knob.
• Set the month. Exit to continue with a long press on the control knob.
• Set the day. Exit with a long press on the control knob and then save with a long press on the control knob.
4.2.4 24 HOURS DISPLAY
Set if the display for the internal RTC clock shall show 12 or 24 hours.
YES
= 24 hours
NO
= 12 hours