Electrolux Compass Pro, Руководство по программированию и настройке

Страница: 17 / 52

Programming and Configuration Manual
17
4.5 YOUR PASSWORD
Set if some of the menus shall be password protected or not. The menus that will be protected by this password are:
•
PRICE PROGRAMMING
•
PROGRAM PARAMETERS
•
LANGUAGE SETTINGS
•
USER INTERFACE
•
YOUR PASSWORD
•
CONFIG. 1
•
I/O CONFIGURATION
Set the desired password.
The password can be changed at any time.
0000 = No password
For some markets / segments a default password is set from factory: 9191.
4.6 I/O CONFIGURATION
Activate the
I/O CONFIGURATION
menu.
If a password is set in
YOUR PASSWORD
, a password is needed to continue. Enter the password set in
YOUR PASS-
WORD
and press the control knob.
The display will now show the following submenus:
•
LIST ALL I/O BOARDS
•
SETUP ALL I/O BOARDS
•
ADD/REMOVE I/O BOARD
4.6.1 LIST ALL I/O BOARDS
All the I/O boards in the machine are listed on the display.
1 = Active I/O board
0 = Inactive I/O board
4.6.2 SETUP ALL I/O BOARDS
After replacing an I/O board or in instances where an I/O board has been added to the machine, the new I/O board
must be set up in order to activate the function options.
The function options of the I/O board are controlled by the parameter software loaded on the relevant program
device.
Set up the I/O boards one by one by pressing the service button on the board. Follow the instructions on the display.
4.6.3 ADD/REMOVE I/O BOARD
A new I/O board that has been set up needs to be added in this menu in order to function. (If the machine software is
prepared for an extra I/O board).
Select the I/O board you want to add or remove and press the control knob. Add or remove up the I/O board by press-
ing the service button on the board. Follow the instructions on the display.
Note!
I/O boards that the machine must have to operate can not be removed.
4.7 CONFIG. 1
Activate the
CONFIG. 1
menu.
If a password is set in
YOUR PASSWORD
, a password is needed to continue. Enter the password set in
YOUR PASS-
WORD
and press the control knob.
Activate the relevant sub-menu.
The sub-menus are divided into different sections,
COMMON
and
DRYER
.
In
COMMON
all parameters valid for both washer extractors and tumble dryers are listed.
In
DRYER
all parameters valid only for tumble dryers are listed.