Electrolux Combi TOUCH Скачать руководство пользователя страница 47

Страница: 47 / 64

temperature and, when used, the food core temperature at
specific intervals.
• If the HACCP function is enabled it will be possible to

download HACCP log to USB pendrive.

Autostart

This setting allows to enable / disable (

) the Autostart in

all modes.
When enabled the cycle is started by closing the oven door.

Manual

This setting allows to enable / disable (

) the Manual

cooking mode and modify its options:

NOTE!
If a mode is disabled, it is not visible in the upper
drawer.

General

• Show real and set values. The activation allows to display

the cycle with more detailed information: humidity, temper-
ature and time are shown as current and set values.

• Always show probe temperature. It allows to display the

probe temperature values.

• Cooking preheating. It allows the oven to perform the

preheating/precooling phase.

• Advanced preheating. This activation allows to set a

temperature to be reached in preheating/precooling phase.
Touch the temperature row and set the required value.

• Multi-phase cooking. It allows the oven to perform Multi-

phase cooking cycle.

• Delayed start. It allows the oven to postpone the cycle start.

Timer/Temperature dialogs

• Short cooking. The activation enables the short cooking

feature showing up.

• Eco-delta cooking. The activation enables the Eco delta

cooking feature showing up.

• Minimum cavity-probe temperature difference. Touch to set

the minimum value on the appearing touchpad (e.g. 5

℃

Utilities

• Cooking info in option drawer.
• Show consumptions at the end of cooking. The activation

allows a recap message to show up at the end cycle.

Hold

• Default convection temperature 160°. Touch the value to

adjust the default temperature.

• Default steam temperature 100°. Touch the value to adjust

the default temperature.

• Probe temperature increase 5°. Touch the value to adjust

the probe temperature.

Set default cycle

This setting allows to define the default cooking cycle with the
default parameters in manual mode. Set the cycle and the
cooking parameters and save it.

Automatic

NOTE!
If a mode is disabled, it is not visible in the upper
drawer.

This setting allows to enable / disable (

) the Automatic

cooking and the Preset Management.

• Food type

This setting allows single food type showing up on the
display.

Preset Management

•

This setting allows single special cycle showing up on the
display.

•

Presets

This setting allows single preset showing up on the display.

Programs

This setting allows to enable / disable (

) the Programs

mode and the related functions.

• Show categories. This activation allows food categories to

show up on the display.

• Show most used. It allows most used programs to show up

on the display.

• Enable Programs save. It allows “save program“ function to

be shown on the display.

• Enable Programs modify. It allows “modify program“

function to be shown on the display.

• Programs delete. It allows “delete programs“ function to be

shown on the display.

• Programs overwrite. It allows “overwrite programs“ function

to be shown on the display.

• Grid visualization. Once activated it allow to display all

stored program as a grid. If deactivated, the display show
them as a list.

• Enable skip preheat. It allows to skip the preheating phase.

MultiTimer

Food safety

Enable Food Safety Control (FSC)

Enable HACCP

Basic

Integrated

SETTINGS

SERVICE

riduzione figura in scala
del 20,5 %

Manual

Enable Manual Cooking cycle

General
Timer/Temperature dialogs

Utilities

Hold

SETTINGS

riduzione figura in scala
del 20,5 %

Programs

Enable Programs
Show categories
Show most used

Enable Program modify

Enable Program save

Programs delete

Programs overwrite

Grid visualization
Enable skip preheat

SETTINGS

riduzione figura in scala
del 20,5 %

Содержание Combi TOUCH

































































Результаты поиска

Содержание Combi TOUCH

Отзывы:

Похожие инструкции для Combi TOUCH

Бренды по названию

Популярные бренды

Electrolux Combi TOUCH, Руководство пользователя

Результаты поиска

Содержание Combi TOUCH

Отзывы:

Похожие инструкции для Combi TOUCH

Бренды по названию

Популярные бренды