Electrolux Combi TOUCH, Руководство пользователя

Страница: 23 / 64

23
6. When a preset ends, some acoustic signals sound. The
display shows the MultiTimer page list with the ended
preset blinking in green. Open the door and remove food.
After closing the door, the ended preset disappears from
display.
NOTE!
During a preset it is possible to add other presets.
The preset reference number blinks while the door
is open to insert the food in the appliance. When
the door is closed again the preset reference
number stops blinking.
7. When the last preset ends and the food is removed, hold
down the button to stop the preset cycle.
MULTIPHASE DRAWER
Food can be cooked with different modes during its cycle and
therefore in different phases.
The oven enables programmes consisting of several sequen-
tial phases (up to a maximum of 15 phases).
During a programme, going from one phase to the next occurs
automatically. The program automatically stops when all
phases are completed.
How to set the Multiphase programme
1. Set first a cooking cycle, (refer to E.5 Manual mode
paragraph);
2. Add a new phase;
There are two ways to add a phase:
• Touch the “+“ icon in the Multiphase Drawer;
The appliance adds further phases. Touch the Multi-
phase Drawer to check the phase list.
Touch each phase row to assign new parameters.
• Open the Multiphase Drawer and touch “Add cycle“
icon.
Add Cycle
Touch this icon to add a new phase.
The oven adds default phases. Touch the phase row to
set new parameters.
Add Pause
Touch this icon to add the Pause phase.
Add Hold
Touch this icon to add the Holding phase.
NOTE!
The HOLD phase appears always at the end
of the list and cannot be moved and copied.
It is possible to add a maximum of 15 Hold phase.
3. Set the parameters of the new added cycles and touch
to start the cycle.
The running phase is highlighted in green. The phases in
grey in the list are already being performed.
Phases management:
• Touch the 3 dots on the right to open a mini pop-up with the
actions Move, Duplicate and Delete.
NOTE!
The pop-up opens only if the cycle has not
started yet.
• Touch in red to close the mini pop-up.
Move phase
Touch this icon to change the position of the phase.
The other phase numbers start blinking.
Touching the required phase number to select the new
position.
50
%
1
USER MANUAL
00:30
:00
25
C °
50
%
1
USER MANUAL
00:30
:00
25
C °
2
3
25
°C
0030 :
:00
00:30 h:m
160°C
50%
20
%
+ + +
00:30 h:m 50 %
7
160 °C
1
Multiphase
Cycle Pause Hold
MANUAL
50
%
1
MANUAL
00:30
:00
25
C
°
+
+
+
Chill
01:30
:00
MANUAL
Soft / Hard 0°C
01:30 h:m
0
°C
7
1
Multiphase
7
2
3
4
5
6
7
8
9
10
7
7
7
7
7
7
7
7
Chill
01:30
:00
MANUAL
Soft / Hard 0°C
01:30 h:m
0
°C
Multiphase
∞
7
9
10
11
12
13
14
15
7
7
7
7
7
7
+
Pause
+
Cycle
+
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m % °C 00:30 50 160
h:m
%
°C
°C
00:30 50 160
70
Chill
:00
MANUAL
Soft / Hard 0°C
0
°C
7
1
Multiphase
3
2
3
4
5
6
7
7
7
7
7
7
h:m % °C 00:10 50 160
h:m % °C 00:15 80 180
h:m % °C 00:25 50 170
h:m % °C 00:10 50 190
h:m % °C 00:30 50 200
h:m % °C 00:30 50 160
h:m % °C 00:10 70 160
70 °C
50
%
1
USER MANUAL
00:30
:00
25
C °
2
3
4
5
6
7
∞
25
100
%
°C
0030 :
:00
00:30 h:m
160°C
+ + +
h:m % 7 °C 00:30 50 160
h:m % 01:20 50 160 7 °C
1
2
01:20h:m 50% 7 °C 160
4
Multiphase
Phase Pause Hold
00:00h:m
3
MANUAL USER
00:00h:m 7 0°C
25
100
%
°C
0030 :
:00
00:30 h:m
160°C
+ + +
h:m % 3 °C 00:30 50 160
h:m % 01:20 50 160 7 °C
1
2
01:20h:m 50% 7 °C 160
4
Multiphase
Phase Pause Hold
00:10 h:m
3
MANUAL USER