Electrolux CL1 Series, Руководство пользователя

Страница: 14 / 26

14
10 Adjustable feet
11 Salt container (depending on the model)
H CONTROL PANEL DESCRIPTION
H.1 Control panel description
1 On/Off
2 Drain/self-cleaning cycle
3 Display
4 Tank temperature indicator
5 Boiler temperature indicator
6 Wash cycle 1
7 Wash cycle 2
8 Wash cycle 3
9 Regeneration cycle (depending on the model)
10 Active/Wash Safe Control indicator
NOTE!
The temperature shown on the display refers to the
boiler if the indicator “5“ is lit up or to the tank, if the
indicator “4“ is lit up.
The tank temperature is displayed during the wash
phase and the boiler temperature during the rinse
phase.
H.2 Basic Controls
Described below are all the single buttons and functions
available in the various control panel models listed above.
Some functions are common to all models of the range,
whereas others are available only on some versions.
On/Off
This button indicates equipment status: on or off. When the
equipment is on, the button indicator is lit up.
Regeneration cycle
When on the display appears “ rEG “, press this button to
activate the regeneration cycle of the water continuous
softener. Please refer to chapter I.6
Regeneration cycle .
1 2 3 4 5 6 7
1 2 3 4 5 6 7 9
1 2 3 4 5 6 7 8
1 9 2 3 4 5 6 7 8 10