Electrolux AWF 1210 Скачать руководство пользователя | Manualshive

Страница: 11 / 59

background image

SOI/DT 2002-06 eb

11

599 35 27-25

2.4.6

“INTENSIVE” / “HEAVY SOIL” button

This option can be selected during the entire duration of the washing programme, and is available only in
cycles for COTTON and SYNTHETICS.
This option increases the phases of drum movement after the heating phases.
The INTENSIVE / HEAVY SOIL option cannot be selected together with the STAINS, QUICK and
ECONOMY options.

2.4.7

“SHORT or VERY SHORT CYCLE - LIGHT SOIL” / “DAILY” button

This option can be selected during the entire duration of the wash programme, and is available in cycles for
COTTON, SYNTHETICS and DELICATE FABRICS: it reduces the duration of the cycle.
When this option is selected in COTTON and SYNTHETICS cycles, it modifies the rinse sequence as well
as reducing the times: one rinse is eliminated, and the water fill level in the remaining rinses is increased.
It cannot be selected together with STAINS, INTENSIVE and ECONOMY options.

2.4.8

“LEVEL OF SOILING” button

This option can be selected during the entire duration of the washing programme.
The standard programme is set for NORMAL soiling. By pressing this button, the level of soiling can be
modified:

⇒

HEAVY / INTENSIVE (this option can be selected only in cycles for COTTON and SYNTHETICS)

⇒

LIGHT - SHORT CYCLE (this option can be selected only in cycles for COTTON, SYNTHETICS and

DELICATE FABRICS)

The functions of these options are as described for the corresponding individual buttons.

2.4.9 "BIO"

button

This option can be selected only after selecting the type of fabric, and can also be selected during the
washing phase. The BIO option can be selected only in cycles for COTTON and SYNTHETICS with
temperatures of 40

°

C or higher.

The BIO option adds a 10-minute phase of motor movement after heating to 40

°

C, and is designed to

activate the enzymes contained in the detergent.

2.4.10 “HALF LOAD” button

This option can be selected in the COTTON cycles on traditional (i.e. non-Jetsystem) washing machines,
and reduces the number of rinse cycles by one.

2.4.11 “EXTRA RINSE” or “SUPER RINSE” button

Can be used with all programmes

except the wool programm

e. The machine performs 4 rinses instead

of 3.
This option is recommended for people who are allergic to detergents and in areas where the water is
very soft.

«
...
9
10
11
12
13
...
»

Содержание AWF 1210




























































Отзывы:

Нет отзывов

Похожие инструкции для AWF 1210

Бренд: Haier Страницы: 6

Бренд: Haier Страницы: 12

Бренд: Haier Страницы: 34

Бренд: Haier Страницы: 12

Бренд: Haier Страницы: 11

Бренд: Haier Страницы: 28

Бренд: Haier Страницы: 12

Бренд: Haier Страницы: 18

Бренд: Haier Страницы: 16

Бренд: Haier Страницы: 16

Бренд: Gaggenau Страницы: 48

Бренд: Smeg Страницы: 41

Бренд: ZANKER Страницы: 40

Бренд: NEFF Страницы: 48

WashSmart WA4127G1

Бренд: Fisher & Paykel Страницы: 100

Бренд: Alliance Laundry Systems Страницы: 60

Бренд: Alto Страницы: 35

Бренд: Furrion Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды