
6
If the control appears to be operating
normally, the bake element heats, but
the broil element does not heat
49
Oven door does not lock when the oven is
programmed for clean
49
Oven door locks when the oven is programmed
for clean but the oven does not heat
49
Lock motor runs continuously
50
Door latch is partly closed with door open,
cannot close door
50
Sample schematic for ES 200 control system
51
The ES 300 electronic oven control system
52 - 60
How to program the ES 300
52
For a silent control panel
52
Temperature conversion
52
To change the temperature from °F to °C or from °C to °F
52
To set the clock
52
To set the minute timer
52
To change the minute timer while it is in use
53
To cancel the minute timer before the set time has run out
53
To set or change the temperature for baking
53
To set the controls for baking
53
To change the oven temperature after baking has started
53
To set control for continuous bake or 12 hour energy saving
53
To set control for continuous baking
53
To set control for oven lockout feature
53
To set the timed bake feature
53
To program the oven to begin baking
53
immediately and to shut off automatically
53
To program oven for a delayed start time
and to shut-off automatically
54
To change the oven temperature or bake
time after baking has started
54
Speed Bake
54
General cooking instructions
54
To set Speed Bake™ cooking system
54
To broil
55
Self-cleaning oven
55
Adhere to the following cleaning precautions
55
To set the controls for a self-clean cycle
56
When the self-clean cycle is completed
56
Stopping or interrupting a self-cleaning cycle
56
How the ES 300 control system works
56
Bake
56
Time bake
57
Broil
57
Speed bake
57
Clean
57
Calibration
57
To check oven calibration
57
To change the calibration
57
Troubleshooting
57
F1 code
57
F3 code
58
F9 code
58
Control will not program
58
Time bake does not operate
58
Содержание 30" Electric/Microwave Combination Wall Oven
