
40
SECTION D - ELECTRONIC OVEN
CONTROL SYSTEMS
This section covers five electronic oven control systems.
1.
ES 100
2.
ES 200
3.
ES 300
4.
ES 400
5.
ES 450
6.
PRC Glass touch
The ES 100 Electronic Oven Control System:
The ES 100 electronic oven control system is used to
control ovens on non self-cleaning model ranges.
How to program the ES 100:
To set the clock:
When the range is first plugged in, or when the power
supply to the range has been interrupted, the display will
flash "12:00".
1.
Press
Clock Set
.
2.
Within 5 seconds, press and hold the
Up Arrow
or
Down Arrow
until the correct time of day appears
in the display.
To set the minute timer:
1.
Press
Timer ON/OFF .
2.
Press the
Up Arrow
to increase the time in one
minute increments. Press and hold the
Up Arrow
to increase the time in 10 minute increments. The
timer can be set for any amount of time from 1 minute
to 11 hours and 59 minutes. (Note: If you press the
Down Arrow
first, the timer will advance to 11 hours
and 59 minutes.)
3.
The display shows the timer count down in minutes
until one minute remains. Then the display will count
down in seconds.
4.
When the set time has run out, the timer will sound
a 3 second beep. 0:00 will appear in the display until
Timer ON/OFF
is pressed.
NOTE:
While the minute timer is counting down, the “:”
will flash. The minute timer does not start or stop
cooking. It serves as an extra timer in the
kitchen that will beep when the set time has run
out. The minute timer can be used alone or
during any of the other oven functions. When the
minute timer is in use with any other function,
the minute timer will be shown in the display. To
view other functions, press the pad for that
function.
To change the minute timer while it is in use:
While the timer is active and shows in the display, press
and hold the
Up Arrow
or Down Arrow
to increase or
decrease the time.
To cancel the minute timer before the set time has
run out:
Press
Timer ON/OFF
.
To set or change the temperature for baking:
The oven can be programmed to bake at any temperature
from 170°F to 500°F.
To set the controls for baking:
1.
Press
Bake
. "— — —°" appears in the display.
2.
Within 5 seconds, press the
Up Arrow
or Down
Arrow
. The display will show "350°F." By pressing
and holding the
Up Arrow
or Down Arrow
, the
temperature can then be adjusted in small 5°F
increments.
3.
When the
Up Arrow
or Down Arrow
is released,
the oven will begin heating to the selected temperature.
When the displayed temperature reaches the desired
baking temperature, the control will beep 3 times.
4.
To cancel the baking function, press
Clear Off
.
Ba ke
Broil
Tim er
O ff/O n
Clock
Se t
Clear
Off
Содержание 30" Electric/Microwave Combination Wall Oven
