34
5954 00U 01
GB
Attention:
The external panels of the oven must be
removed for the operations described in this section.
As the unit must be operating in order to carry out some
adjustments, pay maximum attention to the live parts.
Attention:
Maintenance in the upper part of the
appliance requires the use of ladders with protec-
tion (guard).
1. PLACE OF INSTALLATION
• Only install the appliance in a suitably ventilated place
.
1.1 REFERENCE STANDARDS
•
Install the appliance in compliance with the current local and
national regulations.
for AUSTRALIA
• This appliance shall be installed only by authorised persons
and in accordance with the manufacturer’s installation
instructions, local gas
fi
tting regulations,municipal building
codes, electrical wiring regulations, local water supply
regulations, AS5601-gas installation, health authorites and any
other statutory regulations.
II. INSTALLATION INSTRUCTIONS
Chemical
Contact with chemical substances (e.g.
detergent, rinse aid, scale remover,
etc.) without taking adequate safety pre-
cautions. Therefore always refer to
the safety cards and labels on the prod-
ucts used.
3.3 TECNICAL DATA PLATE
Meaning of
fi
elds given on the plate:
F. Mod. .................. factory description of product
Comm. Model ....... commercial description
Ser. Nr. ................. serial number
ELX ....................... manufacturer: Electrolux Professional spa
Viale
Treviso,
15
33170 Pordenone (Italy)
Made in EU ........... place of manufacture
99-9999 ................ month/year of manufacture
PNC: ..................... production number code
EL: ........................ [C] power supply voltage, [D] phase
Hz ......................... power supply frequency
kW ........................ max. power input
A ........................... current absorption
EL: ........................ [H] electrical prearrangement
CE ........................ CE marking
4. THE ENVIRONMENT
4.1 PACKING
• All the packing materials are environmentally friendly. They can
be stored without risk or burned in a special waste incineration
plant. Recyclable plastic components are marked as follows:
polyethylene:
outer wrapping, instructions bag, gas
PE
nozzle bag.
polypropylene:
roof packing panels, straps
pp
polystyrene
foam:
corner protectors
PS
4.2 USE
• Our appliances are designed and optimised with laboratory
testing in order to offer high performance and ef
fi
ciency. In any
case, to reduce energy consumption (electricity, gas and water),
avoid using the appliance empty for long periods or in conditions
that compromise optimum ef
fi
ciency (e.g. door open). Also, if
possible, preheat the appliance immediately before use.
4.3 CLEANING
• In order to reduce the emission of pollutants into the environment,
clean the appliance (externally and when necessary internally)
with products that are over 90
%
biodegradable.
4.4 DISPOSAL
• At the end of the product's working life, make sure it is not di-
spersed in the environment.
• Our appliances are manufactured using more than 90% metals
(stainless steel, iron, aluminium, galvanised sheet, copper, etc.)
which can be recycled by means of the conventional recovery
structures, in compliance with the current regulations in the
country of use.
• Make the appliance unusable by removing the power cable
and any compartment or cavity closing devices (when present)
in order to avoid the risk of someone becoming trapped inside.
The symbol
L
on the product indicates that this product
should not be treated as domestic waste, but must be correctly
disposed of in order to prevent possible negative consequences
for the environment and the human health.
Regarding the recycling of this product, please contact the sales
agent or dealer of your product, your after-sales service or the
appropriate waste disposal service.
Содержание 236200
Страница 24: ...54 5954 00U 01 GB ...
