Electrolux 236200 Скачать руководство пользователя страница 10

Страница: 10 / 24

5954 00U 01

INFORMATION - NOTES - WARNINGS

Information area

Area displaying current

Status, Error, Warning

and Utility information.

Warning light signalling oven door open.

burner off

Error

Attention

Information

Queries

UTILITIES

Low speed cycle (fan):

for gentle baking,

such as light patisserie. Combinable with all

cycles.

Pulsed speed cycle (fan):

for low tempera-

ture cooking, ideal for maintaining cooked

products, dehydrating or drying for vegetables

nishing food. Combinable with all cycles.

Normal speed cycle (fan):

for normal cooking.

Ideal for roasting, gratinating and classic

cooking. Combinable with all cycles. (Default

setting)

Manual injection of water in compartment:

for instantly increasing the humidity level

during a cooking cycle. Use the + and - buttons

to adjust the injection duration in seconds (10

s intervals).

Save Program

Programmed Start:

allows the cooking cycle to be

started later by setting the required time.

Multitimer:

for setting cooking of foods at the same

temperature but at different times (max. 14).

MULTIPHASE

Cooking with phases in sequence

: for setting

cooking programs with several phases in automatic

sequence (max. 15 phases).

Active pause phase

Add pause phase

: by entering a time value in this

mode it is possible to delay the start of cooking pro-

grams or include a pause between two cycles (e.g.

proving).

Active Maintaining Cycle phase.

Add Maintaining Cycle (70°C):

for slow and prolonged

cooking, typically for meat (large cuts). Activated at the

end of cooking.
Combinable with all cycles.

VARIOUS AND COMMON FUNCTIONS

Compartment preheating:

indicates that the oven is

preheating the compartment (please wait).

This phase can be skipped in MANUAL mode but not

in AUTOMATIC mode.

SKIP PHASE:

the next foreseen phase can be skipped

for particular types of cooking.

- Compartment preheating

(excluding AUTOMATIC)

- Low temperature phases (PREHEAT, SEARING)

Skip PHASES in Multiphase:

one or more phases

can be skipped during cooking with Multiphase.



Con

Go back to previous page

Cancel space (Backspace)

Find Program

Custom

Содержание 236200

























Результаты поиска

Содержание 236200

Отзывы:

Бренды по названию

Популярные бренды

Electrolux 236200, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 236200

Отзывы:

Бренды по названию

Популярные бренды