Electrolux 236200, Инструкция по установке и эксплуатации

Страница: 15 / 24

45
5958 962 00
GB
5954 00U 01
UTILITIES
(see page 40)
cycle HOT AIR
Fan speed * x
Injection of water in compartment x (from 10sec. to 120sec.)
Programmed Start x
Store programs x
* The default speed is the maximum and never appears in
the information fi eld, whereas the others will appear if selected
(half or pulsed).
INFORMATION
(real data)
175° compartment temperature (C°)
28° core probe temperature (C°)
01:58 clock (1 hour : 58 minutes)
4.4.1 MULTIPHASE
Food can be cooked with different modes during its cycle and
therefore in different phases.
The oven enables programs consisting of several sequential pha-
ses (up to a max. of 15 phases). During cooking, going from one
phase to the next occurs automatically, until automatic stopping
of the program with completion of the last set phase.
A cycle with several phases is set by carrying out the following
operations:
1) switch the oven on;
2) Set for PHASE 1:
- cooking mode (humidi fi cation if necessary);
- compartment temperature;
- cooking time (or alternatively the core probe temperature).
3) Press the "Phase" button and then the "Add new phase" button.
4) For PHASE 2 and following, set as per PHASE 1.
When there are several phases, these will be listed, giving the
relevant settings (an arrow will scroll the next ones which are
not displayed).
Manual
Phase
1 of 1
48°
160°
0:30
0:30
50%
1 of 12
Add Pause Save Program
Add New Phase
160° 0:30
120° 1:15
5
0:15
225° 0:45
1
2
3
4
160° 0:30 5
1
Skip phase basket
Utilities (in drawer)
Pause phase
Scroll list arrow
Add phase button
Auxiliary functions
The fi gure shows phase 1 with the following settings:
1 phase number
Hot Air cycle
5 humidi fi cation
160° temperature (C°)
0:30 cooking phase time (0 hours : 30 minutes)
Also, one or more phases can be skipped during cooking; press
the symbol
next to phase 3 (ex. in fi gure) to go to this.
50% 50%
225° 0:45
3
The Multiphase also has special phases, such as:
- Pause
for setting a pause between cooking cycles.
- Maintaining cycle with the possibility of setting a food tem-
perature that is kept constant for an in fi nite time 8

4.4.2 MULTITIMER
With the MultiTimer system it is possible to set a different time for
each recipe (chicken, potatoes, etc.) or for each pan placed on
the various levels, e.g. starting from level 1 at the top and going
down to 2, 3, etc.
This function also allows the oven to be used with an "à la carte"
menu, where the food can be placed in the oven at the required time.
To set the MultiTimer, proceed as follows:
1) open the drawer in Manual mode and press the relevant button
MultiTimer button
Then press the following buttons:
2) START cycle start for setting the Multitimer
START
3) MultiTimer to access the setting of times.
Manual
Multitimer
Timer 1:
-- : --
Timer 3:
-- : --
Timer 5:
-- : --
Timer 7:
-- : --
Timer 9:
-- : --
Timer 11:
-- : --
Timer 13:
-- : --
Timer 2:
-- : --
Timer 4:
-- : --
Timer 6:
-- : --
Timer 8:
-- : --
Timer 10:
-- : --
Timer 12:
-- : --
Timer 14:
-- : --
MultiTimer -------->
4) Timer1 and enter the recipe name (chicken, potatoes,
etc).
5) --:-- and enter the time with the keypad.
For Timer2 and following, set as per Timer1.
To start the cooking cycle, open the oven door, load the food and
close the door.
The MultiTimer will start the countdown with the position having
the shortest time setting.
At the end of each set cooking time the oven will sound a beep
to indicate the type of food cooked. Open the door and remove
the ready to serve product.