Electrolux 10 GN 1/1, Руководство пользователя

Страница: 31 / 38

31
Anom-
aly
Type of
anomaly
Description
Possible causes Actions
FSnr Warning Cooling fan issue
• Inlet air filter dirty
• Cooling fan failure • Clean inlet air filter;
• Check with a thin strip of paper whether a
consistent air flow can be detected at the
cooling air inlet: if not, call Service.
FUXX
(XX = 00
- 17) Stops oven Upper cavity motor
failure Diagnostic according to
error number (from 00 to 17)
displayed. Switch the oven OFF/ON;
If the error persists, manually clean the oven
cavity and call Service.
GbbU Stops the
boiler Boiler gas burner
locked
• Air in gas supply;
• Gas supply is closed;
• Issue with the electric
supply of the burner
system;
• Burner system internal
failure;
The oven can continue to work both in convec-
tion and ISG mode.
To recover full boiler functionality:
• Switch the oven OFF/ON.
• If the error occurs at the cycle start, call
Service.
• If the error occurs after 5 ignition attempts:
1. check the gas supply main valve is open;
2. reset the error and attempt new cycle;
3. if the error persists, switch OFF/ON the
oven and attempt new cycle again;
4. if the error persists, call Service
GbCd Cycle
paused Cavity lower burner
locked
• Air in gas supply;
• Gas supply is closed;
• Issue with the electric
supply of the burner
system;
• Burner system internal
failure;
The oven will not operate until restoring the
burner functionality.
To recover the functionality:
• Switch the oven OFF/ON.
• If the error occurs at the cycle start, call
Service.
• If the error occurs after 5 ignition attempts:
1. check the gas supply main valve is open
2. reset the error and attempt new cycle
3. if the error persists, switch OFF/ON the
oven and attempt new cycle again;
4. if the error persists, call Service
GbCU Cycle
paused Cavity upper burner
locked
• Air in gas supply;
• Gas supply is closed;
• Issue with the electric
supply of the burner
system;
• Burner system internal
failure;
The oven will not operate until restoring the
burner functionality.
To recover the functionality:
• Switch the oven OFF/ON.
• If the error occurs at the cycle start, call
Service.
• If the error occurs after 5 ignition attempts:
1. check the gas supply main valve is open
2. reset the error and attempt new cycle
3. if the error persists, switch OFF/ON the
oven and attempt new cycle again;
4. if the error persists, call Service
GrCo Stops
cleaning
cycle Grease collector valve
opened Misuse Ensure to close the grease collector drain valve
before restarting the cleaning cycle.
HdXX
(XX =
01-26) Stops oven Valves/pumps
activations Diagnostic according to
error number (from 01 to 26)
displayed. Switch the oven OFF/ON;
If the error persists, follow instructions displayed.
If the error persists, manually clean the oven
cavity and call Service.
HFnI Stops
humidifier Humidifier not working
• Water missing;
• ISG circuit obstruction.
The oven has detected a problem with the
humidifier (ISG). It could be possible to cook in
convection mode only.
Verify the water supply valve is fully open and
the water filler has no obstructions. Clean it if
needed.
If the problem persists, call Service.