Electrolux 10 GN 1/1, Руководство пользователя

Страница: 14 / 38

14
2. To close the door press it against the oven enough to lock it.
20 GN Model
1. Rotate the handle by 90 ℃ counterclockwise to open the
door completely. The cooking programme is stopped, if in
progress.
2. For closing rotate the handle by 90 ℃ counterclockwise until
it stops and bring the door against the oven.
3. Keeping the door pressed against the oven, rotate the
handle back in its vertical position to complete its locking.
E.4 Control panel
WARNING
Refer to “ WARNING and Safety
Information “.
A. Digital panel
B. ON/OFF button
C. USB key in/out
D. Connection for accessory/data recovering
E. Openable flap
F OPERATING
F.1 QUICK GUIDE STEPS
1. TO LIGHT THE OVEN PRESS “I“ SIDE OF 0-I BUTTON;
2. A DIAGNOSTIC ELECTRONIC CYCLE WILL OPERATE
FOR FEW SECONDS;
3. SET THE REQUIRED COOKING CYCLE AND THEN
PRESS “START“ BUTTON;
4. YOU CAN STOP THE COOKING CYCLE ANY TIME BY
PRESSING “STOP“” BUTTON;
5. AT THE END OF COOKING CYCLE A BUZZER WILL
ADVISE YOU.
TO SHUT DOWN THE OVEN PRESS “0“ SIDE OF 0-I
BUTTON.
WAIT 5 MINUTES BEFORE RELIGHTING.
F.2 Switch the oven ON
Press the “I“ side of the button “O – I“ to switch the oven on.
Press the “O“ side of the same button to switch the oven off.
IMPORTANT
For gas models only
: wait 5 minutes before
relighting.
• the corresponding O - I button lights up;
• the control panel switches on;
The TIME display is lighted up:
• keep pressed the TIME button to set the year, month, day,
hours and minutes; on the keypad press the “>“ or “<“ buttons
to move forward or backward to set the required value;
(Example figure below 12:05)
F.3 Displays and controls description
The oven allows cooking with different cooking modes according
to the type of food and your requirements.
It is possible to set the various modes from the display by
pressing the corresponding icon.
A
B
C
D
E
A G
J
H
I
D
C
B
E
F