manualshive.com logo in svg

Electrolux Professional IC43316, Руководство по эксплуатации

Поделиться
Скачать
Electrolux Professional IC43316 Скачать руководство пользователя страница 5

01103042

Page

Notice

Date

OPERATING 

HANDBOOK

1

1004

2

Before any use, it is compulsory to read the instruction handbook.
Users must have learnt how to the machine operates.
The identification plate is situated on the left side.

This machine should be installed in conformance to the health and safety regula-

tions, and only used in a sufficiently aerated area.
Check the instructions before installing or using the machine.

In the machine you should have found a set of instructions and a servicing poster to display 

in your laundry.
You must have found with this handbook, a crank for the manual drive of the cylinder.
Depending on its destination, the dryer ironer is delivered bare or may be placed on a trans-

port pallet and/or packed with plastic film.

In some cases, it may be delivered in maritime packing (wood crate).
Please refer to the handling chapter in this instruction handbook for a description of handling 

operations.

2.  General

Fresh air ventilation openings shall not be blocked and or sealed.

Содержание IC43316









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды