Electrolux Professional IC43316, Руководство по эксплуатации

Страница: 18 / 40

01103042
Page Notice Date
OPERATING
HANDBOOK
1004 4
4
Safety devices
Feed safety device
The space between the feed safety flap and the drive bands is too small for you to enter your
fingers. The machine stops automatically as soon as the flap is pushed in.
Protection of motors
The motors have overload protection :
• by thermomagnetic circuit breakers and
• by the electrical selector (for movement).
Restarting the machine
After each stoppage of the machine, power cut, emergency stop, or activation of the feed
safety, it will then be possible to start again:
- in the case of a machine with a standard console, only after pressing the green button of
the panel;
- in the case of a machine with a DIAMMS console, only after pressing one of the buttons of
the control panel.
Gas heating
The gas burner is ignited and the flame is controlled by an electronic box that provides inte-
gral safety, for example if the flue draft is poor or if the gas supply is cut off.
If you have a DIAMMS console, a flashing message on the control panel signals that the
system has been set to safe.
If you have a standard console, the orange lamp signals that the system has been set to
safe. If this lamp flashes this signals that the machine has overheated.
A pressure switch connected to the combustion products outlet turns off the machine’s hea-
ting function should extraction problems arise.
Accessibility
All casings can be disassembled using a special tool.
Heating safety device
The control panel applies an initial safety level at the time the machine starts up.
In the case of a DIAMMS console, if the temperature has not been reached after a preset
time the heating order is then interrupted.
Similarly, in the case of a DIAMMS console, operation of heating is conditional on the cylin-
der rotating. If for any reason whatever the cylinder stops, heating of the machine stops.
A safety thermostat, which is independent of all electronic systems, limits the heating tem-
perature of the ironing cylinder in all circumstances (except in the case of a steam heating
machine).
4. Safety