Electrolux Professional IC43316 Скачать руководство пользователя страница 16

01103042

Page

Notice

Date

OPERATING 

HANDBOOK

1004

2

4

4. Safety

All repair and servicing work must be undertaken by a competent person.
Never wear full clothes during work (wide sleeves, ties, scarves, etc.).
Disconnect all energy sources and let the ironing cylinder cool down before doing any work 

on the machine.
In order to avoid any danger of fire or explosion, never use inflammable products to clean the 

machine.
If you smell gas, turn off the gas supply, open the windows, do not touch any switches and 

inform the maintenance service.
Evacuation of vapour from a dryer ironer with gas heating must never be connected to the 

evacuation used for a gas heating machine and a dry cleaning machine or other machine of 

the same type.

SAFETY
Never iron if the mobile safety protector 

(hand protection bar) is not operating.

CAUTION
The temperature of the ironing cylinder 

after use can reach 200 °C (392 °F) and 

can cause serious burns if you touch it.  

Allow the machine to cool down before 

doing any repair or servicing work.

IMPORTANT

To ensure optimal operation of the ma-

chine (gas heating, electronic boards, 

etc.), ensure that the ambient tempera-

ture does not fall below 15°C (59 °F).

Содержание IC43316









































Отзывы: