i-
SERVER TEXT/GPRS/DATA LIVE-BASED TRACKING
For TEXT/GPRS/Data live-based tracking, make sure to download/install the i-Server application from
either Google Play App Store or iPhone App Store depending on the brand of your smartphone
you are using. Make sure to setup the Access Point Name (APN) first before installing the app.
Here is a YouTube demonstration of i-Server App setup:
REMEMBER:
Your PeTrack will fall asleep automatically after sitting still for more than 3 minutes,
if you’re trying to setup your APN, or call it, or text it, or just getting it to respond, you need to either
physically shake the unit every minute while you’re outside or it needs to be attached to an active pet
which is outside. Otherwise you’ll have no response, as it’s completely dependent on motion detection to
conserve its battery power.
APN (Access Point Name) Setup
1.
Ask your SIM card provider for the APN of your SIM card to allow GPRS internet access to your
PeTrack. For example, for AT&T Wireless this may be “
epc.tmobile.com
” for T-Mobile. (You must first
have a data plan and confirm the APN name with the provider.)
2.
Once your SIM card is installed, remember to turn on your PeTrack and place it outside for the
time being.
3.
From your mobile phone, send a text message to your PeTrack (phone number will be the one
provided to you by the SIM card provider). Send text command:
Format:
510#0000#(Enter APN Here)
Sample:
510#0000#att.mvno
REMEMBER:
If you would like to delete your APN and switch back to the TBPT App or On-
Demand Tracking (no app required), send text:
510#0000#0
4.
Allow enough time to receive a text message response back reading “
SETUP OK
” and a series of
technical data. Once this has been received, you may continue to the next step. If you have not
received this, try again and relocate the device in a better reception area. Contact us if you
still are having troubles with the APN setup.
This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
13