iConserve User Guide___________________________________________________
9
Switch alarm on or off
Press the “TIME/ALARM” button to set the alarm “OFF” flashing which indicated that the alarm
function is off. Press the “FWD/BWD” button to switch on the alarm.
If you have switched the alarm on, press the “TIME/ALARM” button again to set the maximum
daily usage. The number “0.0” will start flashing, indicating that the alarm automatically goes off
when the current usage is 30% higher than the average amount used in the last six days. Use
the “FWD/BWD” button to adjust the number according to your preferences. Press and hold
down the “FWD/BWD” button and the number will increase/reduce quickly from 0 to 200.
Press the “TIME/ALARM” button again and it will return to the normal display with a leaf symbol
on the screen which is notifying you that the energy alarm is enabled and active. When the
alarm is triggered, a new icon will appear and the unit will beep for 2 minutes, and display will
continuously blink.
MUST READ…
•
When installing the sensor and when in doubt, always consult a certified electrician.
•
Do not immerse the unit in water or other liquids.
•
Do not use this product where radio frequencies can cause malfunctioning.
•
Do not subject the unit to excessive force, shock, dust, temperature or humidity.
•
The LCD panel is made of glass and may break if the unit is dropped, impacted, or
subjected to shock.
•
Keep the product away from heat sources like radiators, stoves, heaters, etc.
•
Do not use the product near water or in humid areas.
•
Do not attempt to repair the product yourself. Contact customer service for assistance.
FAQ (for a more advanced understanding of the iConserve, continue reading…)
