iConserve User Guide___________________________________________________
4
Transmitter Coupler onto each main wire. There may be a ground wire that’s gray or white;
you’ll want to skip this wire. Just attach each sensor around the live wires only. If you’re
interested in just monitoring one appliance such as you’re a/c or water heater, just install a
coupler to that particular devices power feed in the breaker box. Most household electricity
breaker panel’s use single-phase, however some larger homes or townhomes can use three-
phase. Most standalone business buildings will use three-phase. Note for three-phase the
iConserve unit is required to have a sensor connected to each of the three-phase live main
power cables. We offer two sensor sizes 10mm and 16mm. You will only use one size and at
most use three sensors (called 3 Phase) at one time. If you’re not sure how many you need to
use or what size please consult your electric company or a local certified electrician.
As shown in the example, once the live main power cable is found clip the transmitter’s coupler
sensor around the insulated live main power cable. **DO NOT TOUCH OR CLIP THE SENSOR
AROUND RAW METAL OR UNINSULATED WIRING. ** The sensor coupler can be clipped
anywhere along the insulated live main power cable, exact location doesn’t matter. Just try and
clip it on a bend in the cable so it simply rests on the bend and nothing else is interfered with.
Installing batteries for both Transmitter and Main Display Unit
•
Remove the battery cover from the back of the transmitter or display unit.
•
Insert AA batteries into the battery compartment ensuring that the polarities of the
batteries are in the correct position.
•
Replace the battery cover of the transmitter or display unit.
Link display unit and transmitter
Press the “SEARCH” button of the display unit and then the “TRANSMIT” button (the only
button on the transmitter) of the transmitter to link the communications between the display unit
and the transmitter. Keep the units at arm’s length in distance for initial connection.
Operating Guide
Setting time and date
Press the “TIME” button and hold for 2 seconds to enter the year setting. The last two numbers
of the year digits will flash. Press the “FWD/BWD” button to increase or reduce the number.
Press and hold the “FWD/BWD” button for the number to increase and reduce quickly.