![background image](http://html.mh-extra.com/html/electroflip/iconserve/iconserve_user-manual_2381618007.webp)
iConserve User Guide___________________________________________________
7
If you do not choose “TARIFF2”, the above step will automatically be skipped.
Press the “MODE” button again to set the “tariff1” standard until the number “0.125” starts
flashing. Press the “FWD/BWD” button for the number to increase or reduce.
Press the “MODE” button again to set the CO
2
emission. This will cause the number “0.45”
(kg/kwh) to start flashing. Press the “FWD/BWD” button to set the desired number. In the United
States the average CO
2
emission is 0.600 KG per KWH. Consult your Power Company or local
electrician to confirm.
View instant and accumulative energy, cost, CO
2
In normal display mode, you can view current power (kW) on the right screen and the
accumulated energy (kWh).
Press the “MODE” button to see the “COST” display. You can view the current cost of electricity
per hour on the right screen and accumulated cost since you last reset it on the right screen.
Press the “MODE” button again to see the “CO
2
” display and view the current emission of CO
2
per hour on the right screen, as well as accumulated emissions.
The date and time will display alternately every 10 seconds at the lower right screen. The
histogram on the lowest screen will show the usage of energy in the last 7 hours.
Press the “MODE” button once again to return to the current “ENERGY” display.