EPS-HDM1004ECO
Encoder Modulator User Manual
Figure-7
TS Config
→
→
→
→
Stream select:
Clicking “Stream select”, it displays the interface where users can select program(s) to
multiplex out and modify program info. (Figure-8)
Figure-8
Configure ‘Input Area’ and ‘Output Area’ with buttons in ‘Operation Area’. Instructions are
as below:
: To check encoder stream locked or not, green means current encoder
stream locked
: To check current TS overflowing or not, red color means current TS
overflowing, need reduce program
: To filter/not filter the source CA information
: To enable/disable the PID remapping
To refresh the input program information
To refresh the output program information
Select one input program first and click this button to transfer the selected
program to the right box to output.
Similarly, user can cancel the multiplexed programs from the right box.
To select all the input programs
Input Area
Output Area
Operation Area