Using the ECT 2 remote control (sold separately)
Before you can use the ECT 2, you have to connect the ECT 2
to the EMP 1.
Follow these steps to connect the ECT 2:
1. Turn off the EMP 1
2. Press and hold the lower button on the front panel, and
turn on the EMP 1.
3. The display will show “Searching for remote”
4. Press and hold the Select and Device buttons on the
remote control for a couple of seconds.
5. The display on the EMP 1 will change to “Device
found”
6. Restart the EMP 1. I.e. turn off the EMP 1 and wait for
5 seconds before you turn on the EMP 1 again.
Controlling the EMP 1 with the ECT 2 remote control:
Press the Device button until the display on the ECT 2 shows
“Multiplayer”.
Use the joystick to control the EMP 1:
Joystick up
= play/pause
Joystick right = next
Joystick left = previous
Joystick down = stop. Hold the joystick down for some second
eject the disc.
Please read the manual for the ECT-2 for more
information about controlling the EMP-1
