Important notes
For optimal sonic performance, the EMP 1 should be burned in
for a minimum time of 72 hours. The easiest way to burn in
your EMP 1 is to put a disc in REPEAT mode with the rest of
your system turned off.
In daily operation, switch off the EMP 1 player by using the
STANDBY button on the remote. If the EMP 1 has been
switched off, allow two hours of warm-up to optimize sonic
performance.
Due to high class A operation in all Electrocompaniet designs,
it is normal for the EMP 1 to feel warm. Proper ventilation is
important. The EMP 1 should never be completely covered. A
good rule of thumb is to allow at least 3 – 5 cm of air sidewise
and 5 – 8 cm above the EMP 1. If placed into a cabinet make
sure you have proper ventilation.