Unpacking the EMP 1
Immediately upon receipt of the EMP 1, inspect the carton for
possible damage during shipment.
The carton and packaging have been designed to provide the
safest possible protection for transport of this player.
Unpack the unit carefully. Save all packaging materials for
future shipment.
The contents of the carton
1 pcs Electrocompaniet EMP 1 – Universal Player
1 pcs AC mains cord.
1 pcs Inspection card.
1 pcs Remote control
2 pcs Batteries
The EMP 1 are designed to be used together with the new
ECT-2, the advanced RF remote controller, sold as a separate
product. However, if you do not have this unit we have
included a standard IR controller.
Set up procedure
Before connecting the EMP 1 to the mains, check that the main
voltage indicated on the rear panel corresponds to the line
voltage in the territory where you intend to use the unit.
How to avoid damages
Do not under any circumstances connect or disconnect
equipment when power is turned on.
