11
ENG
Start your “EC Remote” App
As long as you have downloaded the
App following the previous instruc-
tions, you will find the App where you
normally find other Apps on your device.
The first thing to do is to select your new
ECM 1.
Tap
ZONE BUTTON
Now select your ECM 1. For example
the unit name can be “ECM1_1”. If no
name is listed, tap the refresh icon at the
top bar to rescan for your ECM 1. When
you find your unit, tap on the name to
start the setup.
Use a web browser
Enter the address of your ECM 1 in the
web browser.
If you are using a Mac or Linux machine,
this will be “ECM1-<number>.local”.
Where <number> are the last 4 digits of
the serial number, excluding leading zeros
(e.g. “ECM1-565.local”).
On a PC, please enter the system’s IP
address. You may find this address in
your router, by referencing the EC Livings
MAC address. Please follow your router
manufacturer’s instructions for finding an IP
address given a MAC address.
Begin the Initial Setup
Simply tap START to begin the setup of the new ECM 1.
Select your language
Just select your language. It will send you automatically to the next screen.
Name your ECM 1
(
Give your unit a zone name if you plan to expand )
You can give your ECM 1 any name you want. Examples of name is Livingroom, Kitchen,
Bedroom, Bathroom. Tap ENTER or Return on the keyboard when you have entered your unit
name. Tap
Next
(upper right corner) when you are done.
A Zone is the name we use for the area this
device is planned to cover. Typical Zones
could be livingroom, bedroom, kitchen etc.
FOLLOW THE ON-SCREEN INSTRUCTIONS
OR
R E C O M M E N D E D
