background image

X

-Array Install™ Xi-1152/94 Loudspeaker System

X-Array Install™ Xi-1152/94 Loudspeaker System

8

Specifications

Frequency Response (measured in far
field, calculated to one meter on axis,
swept si ne wave, one watt into LF
section 2.83 V at 250 Hz, anechoic
environment; see Figure 2):

50-16,000 Hz

Crossover Frequency:

1,500 Hz

Efficiency, LF/HF:

4.2/25 %

Maximum Long-Term-Average Power-
Handling Capacity (per ANSI/EIA RS-
426-A 1980), LF/HF:

600/75 watts

Maximum Long-Term-Average
Midband Acoustic Output, LF/HF:

25/19 acoustic watts

Sensitivity (SPL at one meter, indicated
input power, anechoic environment,
average level), LF/HF,

1/1 watt:

98.0/112.0 dB

300/75 watts:

125.8/130.8 dB

Beamwidth (angle included by 6-dB-
down points on polar responses,
indicated one-third-octave bands of
pink noise; see Figures 1 and 3),

Horizontal, 1,200-16,000 Hz:

90° (+11°, –13°)

Vertical, 1,200-16,000 Hz:

40° (+8°, –8°)

Directivity Factor, R

θθθθθ

(Q), 1,200-16,000

Hz Average (see Figure 4):

17.1 (+3.1, –4.9)

Directivity Index, D

i

, 1,200-16,000 Hz

Average (see Figure 4):

12.3 dB (+0.7 dB, –1.5 dB)

Distortion (115 dB SPL at one meter,
shaped spectrum; see Figure 5),

Second Harmonic,

100 Hz:

2.6 %

500 Hz:

0.2 %

2,000 Hz:

1.4 %

5,000 Hz:

1.2 %

Third Harmonic,

100 Hz:

0.7 %

500 Hz:

0.3 %

2,000 Hz:

<0.1 %

5,000 Hz:

<0.1 %

Transducer Complement,

HF:

DH6 driver, HP94S 90° x 40° horn

LF:

EVX-155 15-in. woofer

Impedance (see Figure 6),

Nominal, LF/HF:

8/16 ohms

Minimum, LF/HF:

6.3/12.2 ohms

Input Connections:

Two Neutrik NL4MPR Speakon

®

connectors paralleled

Recommended Amplifier Power,

HF:

125-250 watts

LF:

600-1,200 watts

Enclosure Construction,

Enclosure Shell:

18-mm, 13-ply birch plywood

Finish:

Black textured paint

Grille:

Vinyl-coated steel with foam

Rigging:

Two-point heavy-duty L-track system,
accepts New Haven NH32102-2
double-stud fittings, or New Haven
NH8192-2S or Ancra 42546-10 single-
stud fittings with safety pins

Dimensions,

Height:

759 mm (29.88 in.)

Width (front):

450 mm (17.73 in.)

Width (back):

248 mm (9.75 in.)

Depth:

413 mm (16.28 in.)

Angle:

30º wedge

Net Weight:

40.8 kg (90 lb)

Shipping Weight:

43.1 kg (95 lb)

SPEAKERS - X-Array Install™

Part Number 535193RevA — 9822

600 Cecil Street, Buchanan, MI 49107

800/234-6831, 616/695-6831, 616/695-1304 Fax

©Telex Communications, Inc. 1998 • Litho in U.S.A.

Содержание Xi-1152/94









Отзывы: