background image

Model Summary

EVID™ FM6.2

The Electro-Voice ® EVID FM6.2 loudspeaker system is a complete 
two-way in-wall loudspeaker package. The package consists of a bezel 
assembly, grille, rear enclosure, 6.5” two-way loudspeaker coupled with 
a 6.5” passive radiator and an internal line-matching transformer. The 
loudspeaker features 6.5” low-frequency cone and high-temperature 
voice-coil assembly along with a 6.5” long excursion passive radiator and 
titanium coated dome tweeter. The EVID FM6.2 loudspeaker utilizes a 
crossover network, centered at 3,300 Hz, that provides 16-dB-per-octave 
tweeter protection outside of its operating range. In addition the FM6.2 
features a comprehensive protection circuit to shield the woofer and 
tweeter drivers from excessive power levels.

The FM6.2 utilizes a transformer that offers a selection of 7.5, 15, 30, or 

60 watts delivered to the loudspeaker system using either 70-V or 100-V 

lines. The wattage is selected via a convenient switch on the front baffle.  

The unit can also be operated as an 8-ohm speaker via the same front 
panel selector switch.

The perforated grille is finished in semi-gloss white powder-coated enam

-

el. The baffle and bezel is constructed from heat resistant ABS.  The 

rear enclosure is constructed from zinc-plated, steel. The rear enclosure 
provides an optimum internal volume, ensuring extended low-frequency 
performance. It is constructed from heavy-gauge, rugged steel.  The 
steel rear enclosure was optimized using FEA to virtually eliminate panel 
resonance.  The entire enclosure is less than 4” deep providing an easy 
installation into nearly any tight wall or ceiling space.  A rear cover, with 

provisions for a junction box fitting, provides access to a 4-pin terminal 

block that allows direct connection to the speaker and provides pass 
through to additional speakers. FM6.2 loudspeakers provide wide disper-

sion, high-efficiency, high-maximum output, ease of installation, and 

wide-range reproduction of music or voice. 

EVID™ FM Series Installation and Operation Manual 

3

Содержание EVID FM4.2

















Отзывы: