Electro-Voice EVERSE 8, Руководство пользователя

Страница: 45 / 64

EVERSE 8 Amplifier DSP | en 45
Electro-Voice
User manual
2022-10 | 02 | F.01U.401.530
10. Select EXIT to return to the home screen.
RECALL menu
The RECALL menu allows you to retrieve up to five customized user settings. Available options
for this selection are: BACK , 1 , 2 , 3 , 4 , and 5 . In addition, setting 6 is available to recall a
default setting. This setting cannot be used to store user settings.
Recalling customized user settings
To recall customized user settings:
1.
From the DSP control menu, scroll to RECALL.
2. Push the MASTER VOL knob to select RECALL .
The RECALL screen appears.
3. Push the MASTER VOL knob to select 1 .
The selected item is loaded.
4. After the preset is loaded, the menu will return to the home screen.
STANDBY menu
To extend battery life, the EVERSE loudspeaker will enter STANDBY mode after a set amount
of time. The STANDBY menu allows you to set the idle time (time with no audio or control
signal present) before the loudspeaker enters STANDBY mode.
To return to normal operation mode:
4 Apply an audio signal, BLE control signal via the QuickSmart Mobile app.
Or
4 Press any button on the loudspeaker.
RESET menu
The RESET menu is used to reset the loudspeaker to original factory settings. Available
options for this selection are: NO or YES .
Resetting the system
To reset the system to original factory settings:
4 From the DSP control menu, select RESET .
The DEFAULT SETTINGS? message appears.
4 Select YES .
The ERASE USER PRESETS? message appears.
4 Select YES .
i
Notice!
The RESET menu item is used to revert the loudspeaker to the original factory default
settings.
INFO menu
The INFO menu is used to display the firmware version.
Refer to
– Effects (FX) list, page 60