Electro-Voice EVERSE 8, Руководство пользователя

Страница: 44 / 64

44 en | Amplifier DSP EVERSE 8
2022-10 | 02 | F.01U.401.530
User manual
Electro-Voice
LED menu
The LED menu shows power on and indicates limit. Available options for this selection are:
ON , OFF or LIMIT .
– ON - turns the LED on when the power switch is set to ON and system is not in standby
mode.
– OFF - turns the LED off.
– LIMIT - turns the LED off under normal operation. The LED brief blinking indicates the
limiter is activating. Short-term blinking is not critical because the integrated limiter
keeps distortion under control. Constant lighting of the LED indicates the sound is
negatively affected. If the LED is constantly lit, check the rear LCD for more information.
Reducing the output volume is strongly recommended.
The default is ON .
LCD DIM menu
The LCD DIM menu is used to dim the display when the display is idle for 30 seconds.
Available options for this selection are: ON or OFF .
The default is ON .
BRIGHT menu
The BRIGHT menu is used to determine the brightness of the LCD.
The range is 1 (darkest) to 10 (brightest).
The default is
5 .
CONTRAST menu
The CONTRAST menu is used to increase or decrease the visibility of the LCD screen based
on lighting conditions.
The range is 1 (less contrast) to 10 (more contrast).
The default is
5 .
STORE menu
The STORE menu allows you to create up to five customized user settings. Available options
for this selection are: BACK , 1 , 2 , 3 , 4 , and 5 .
i
Notice!
The customized user setting name can contain a combination of alphanumeric characters
including spaces. The alphanumeric character range is A to Z and 0 - 9.
The name field length is 12 characters.
Storing customized user settings
To store customized user settings:
1.
From the DSP control menu, scroll to STORE.
2. Push the MASTER VOL knob to select STORE .
The STORE screen appears.
3. Push the MASTER VOL knob to select 1 .
The Enter name for 1 screen appears.
4. Use the MASTER VOL knob to scroll through the characters.
The characters appear.
5. Push the MASTER VOL knob to select the required character.
6. Turn the MASTER VOL knob to move to the next character entry.
Continue selecting characters until the required name is entered.
7. Use the MASTER VOL knob to scroll to SAVE .
8. Push the MASTER VOL knob to select SAVE .
9. Repeat steps 3 through 8 to store additional customized user settings.