Amplifier DSP controls
The amplifier has a combination of controls and connectors to ensure the most versatile
loudspeaker system.
Full-Range loudspeaker control and monitoring interface
The full-range loudspeaker DSP control menu selections are available for the ETX-10P,
ETX-12P, ETX-15P, and ETX-35P.
Figure 4.12: Full-Range loudspeaker amplifier panel
1.
LCD – DSP control and monitoring interface.
2.
MASTER VOL – Adjusts the sound level.
DSP – Scroll through the menu and select the available choices. Push the MASTER VOL
knob to enter the DSP menu. For more information, see DSP controls, page 28.
3.
INPUT LEVEL – Level control for adjusting the individual inputs’ level. The 12 o’clock
position is unity gain (no gain or attenuation), the range to the left of zero (0). LINE and
MIC input level control is available for both INPUT 1 and INPUT 2.
4.
INPUT – Balanced input for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼ inch TRS or XLR
connectors.
5.
MIX OUTPUT – XLR output sends the mix of both input signals to another loudspeaker or
subwoofer. INPUT LEVEL controls the signal level to MIX OUTPUT. The MASTER VOL or
DSP control settings do not affect MIX OUTPUT.
6.
POWER – AC switch or switching the power ON or OFF. The LCD screen lights up when
the POWER is turned ON.
7.
MAINS IN – AC connection is established via an IEC-connector. The IEC-connector is
compatible with locking type power cords (not included).
4.3
en
25
Electro-Voice
User Manual
2014.02 | 03 | F.01U.276.083
