Tripod or pole mount
ETX-10P, ETX-12P, and ETX-15P loudspeakers mount on a tripod stand or on a pole above a
subwoofer.
Mounting a loudspeaker on a tripod stand
Figure 4.2: Full-Range models on tripod stand
!
Caution!
Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the tripod
stand to be certain it is capable of supporting the weight of the loudspeaker.
!
Caution!
Two (2) person lift and placement is recommended for the heavier loudspeakers. Single
person lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a tripod stand, do the following:
1.
Place the tripod stand on a level stable surface.
▪
Fully extend the legs on the tripod stand.
▪
Do not compromise the tripod stands structural integrity by trying to make the stand
taller.
▪
Do not attempt to suspend more than one (1) loudspeaker on a stand designed for a
single loudspeaker.
2.
Using two (2) hands lift the loudspeaker.
3.
Set the multi-angle pole cup located on the bottom of the loudspeaker onto the pole.
Figure 4.3: Multi-angle pole cup 0° (left) and multi-angle pole cup 7.5° (right)
ETX Powered Loudspeakers
2014.02 | 03 | F.01U.276.083
User Manual
Electro-Voice
