Electro-Voice DC-One, Руководство пользователя

Страница: 13 / 49

DC-One
Owner‘s Manual 13
16 – Output X-Over Button
Pressing the X-Over button places the current preset in Edit mode and jumps to the first Output Channel
Cross-Over screen. Subsequent button presses step through the available output channels (depending on
configuration).
17 – Output PEQ Button
Pressing the PEQ button places the current preset in Edit mode and jumps to the first Output Parametric
Equalizer screen. Subsequent button presses step through the available output channels (depending on
configuration).
18 – Output Delay Button
Pressing the Delay button places the current preset in Edit mode and jumps to the Output Channel Delay
screen. Subsequent button presses step through the available output channels (depending on
configuration).
19 – Output Level Button
Pressing the Level button places the current preset in Edit mode and jumps to the Output Channel Level
screen. Subsequent button presses step through the available output channels (depending on
configuration).
20 – Output Level Meters
Each output channel has an eight-segment output level VU meter. Meter response characteristics can be
selected in the Setup menu: Normal Fast, Peak-Hold Slow Decay. The yellow segment indicates that
limiting is being applied to the output channel. The red segments indicates clipping of the D/A converters
and should be avoided by adjusting the Output Level of the output channel. It is important to understand
how the meters work and what they are displaying. The Output Meters are displayed as “dB to Limiter
Threshold”. In other words, these meters will display the headroom between the output level and the limiter
threshold. When viewed in conjunction with the Gain Reduction meters, this provides a complete display of
level and headroom before and after limiting has been engaged to allow system levels to be optimized.
This also means that the output metering will be displayed differently depending on the limiter threshold
setting.
21 – Output Gain Reduction Meters
Each output channel has a four-segment gain reduction meter that shows the effect of the output channel
Limiter on output level; from 0dB to -12dB.