LX2350-4 Owner's Manual
Revised January 22, 2018
Page 20
800.445.7846 · www.electro-mech.com
Assembling the Cabinets and Corners
The main assembly consists of four scoreboard cabinets and four corner pieces. In
theory, the four scoreboard cabinets are interchangeable and the four corners are
interchangeable. In practice, we make slight adjustments to each piece at the factory to
ensure the best fit. The product is fully assembled for testing before shipment. Then
we mark the position of each piece before taking it all apart to ship. We recommend
following the markings on the cabinets to make sure all the pieces fit back together as
they did at the factory.
The assembly is held together by 3/8x1-inch bolts. Each scoreboard cabinet has four
pieces of tapped hardware built into each side of its frame. The bolts pass through the
cabinet frames and thread into the scoreboard sides. You will find access panels along
the inside/back of each corner pieces. Remove the access panels to install the bolts.
There are a total of 32 bolts (and 32 washers) provided to hold the complete assembly
together. Replace the access panels with all scoreboards and corners are connected.
This assembly work should be completed on the floor with a team to support and align
the pieces while someone else threads and tightens the bolts. Do not attempt to hang
individual sections and complete the assembly from above the floor. This will create
stresses that the cabinetry was not designed to handle.
