ELECTRO INDUSTRIES, INC.
MONTICELLO, MN 55362
W TO W HP OR
NORAIRE CONTROL
ZONE PUMP (OR VALVES) 1-8 ZONES
- FACTORY SET-UP FOR 120V PUMPS.
- IF ALL 240V PUMPS, L2 CAN BE WIRED
TO "NEUTRAL", BUT TRANSFORMER
WIRE MUST BE CHANGED.
- IF ZONE VALVES (SHEET 3) FIELD
CONVERT TO 24V OUTPUT.
1. REMOVE ZONE BOARD BLACK
AND WHITE WIRES FROM
SOURCE T.B.
2. ADD 1/4" PUSH-ON TO THESE
WIRES AND CONNECT AT LOWER
LEFT "24VAC" AND "C" TABS.
3. INSTALLERS RESPONSIBILITY
TO DETERMINE VA AND
REPLACE (EXTERNAL)
TRANSFORMER AS REQUIRED.
AIR STAT (STANDARD 4 WIRE)
UTILITY LOAD CONTROL
BLOWER
GAS FURNACE
GAS BOILER
SOURCE PUMP
COIL PUMP
NORAIRE PUMP CONTROL
UNIQUE OT RESET FEATURE
OT SENSOR
BT SENSOR
SLAB STAT 1-8 ZONES
(1-2 TANKS)
12"
6"
14"
BUFFER TANK CONTROLLER (HP-BTC)
HX101
Rev. 16 10/4/2011
Sheet 8 of 8
