manualshive.com logo in svg

Electro Industries/GaugeTech Nexus 1250, Руководство по установке и эксплуатации

Поделиться
Скачать
Electro Industries/GaugeTech Nexus 1250 Скачать руководство пользователя страница 75

6.7: Display Features Mode

6.7: Display Features Mode

n

Use the 

MODE

button to access the Display Features Mode from other Modes. Use the 

UP/DOWN

arrows to navigate from Group to Group within this Mode. See section 6.8 for a navigational map of
the Display Features mode.

n

Group 1: Reset Max/Min

•

Note

: If the 

password protection

feature has been enabled with the Nexus Communicator 

software, you will need to enter a password to reset the max/min readings. To do this, first press
the Enter button. Then enter the password, one character at a time, by pressing on the UP or
DOWN arrows. Each password character begins as an “A”. Press the UP arrow to increment the
character from “A–Z” and then from “0–9”. Press the DOWN arrow to decrement the character
from “A” to “9–0” and then from “Z–A”. Press SET to enter each character the password. When
the entire password is shown on the Display screen, press ENTER. If the password is correct you
may then press Enter again to Reset the Energy readings.

•

Press the 

Enter

button to reset the Max and Min values.

n

Group 2: Reset Energy

•

Note

: If the 

password protection

feature has been enabled with the Nexus Communicator 

software, you will need to enter a password to reset the energy. To do this, first press the Enter
button. Then enter the password, one character at a time, by pressing on the UP or DOWN
arrows. Each password character begins as an “A”. Press the UP arrow to increment the 
character from “A–Z” and then from “0–9”. Press the DOWN arrow to decrement the character
from “A” to “9–0” and then from “Z–A”. Press SET to enter each character the password. When
the entire password is shown on the Display screen, press ENTER. If the password is correct you
may then press Enter again to Reset the Energy readings.

•

Press 

Enter

button to reset the Max and Min values.

n

Group 3: Display Baud Rate/Address

n

Group 4: Display Communication Protocol

n

Group 5: EIG Use Only

n

Group 6: EIG Use Only

n

Group 7: Lamp Test

•

Press 

Enter

to conduct an LED test.

n

Group 8: Display Scroll ON/OFF

•

Press 

Enter

to turn the scroll feature on or off. When the scroll feature is on, the P40N External

Display will scroll through the first reading of each group in the Dynamic Readings Mode. If a
button is pressed during the scroll, scrolling pauses for one minute.

e

Electro Industries/GaugeTech  

Doc #: E107-7-06-121

6-7

Courtesy of NationalSwitchgear.com

Содержание Nexus 1250




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды