Electro-Harmonix TRI PARALLEL MIXER, Руководство пользователя

Страница: 9 / 12

Figure 3
Figure 1:
An example where you may make use of RETURN MUTING
mode. Even when channel one is inactive, bass guitar signal will still
flow out of the SEND 1 jack and into the EHX Battalion Bass Preamp/DI.
This allows the signal to always come out of the Battalion’s XLR out, but
only when the channel is active would it be routed to the amp.
Figure 2: An example of using the Tri Parallel Mixer as an instrument
switcher. Plug each instrument into a channel’s RTN jack, then set the
Tri Parallel Mixer to XOR switching mode and click a channel to select
that instrument. Use the RETURN knob for a given channel to adjust the
level of just that instrument.
Figure 3: An example using the Tri Parallel Mixer to send a guitar to two
separate amplifiers. You could either instantaneously switch between
the two amplifiers or simultaneously send your guitar signal to both. Use
the SEND knob for a given channel to set the level of the signal sent into
the amplifier.