Page
6
of
11
INSTALLATION
This unit can easily be moved from one room to another. While moving the unit please
note that it must always be kept upright and then placed on an even surface.
•
Remove any packaging - keeping the air cooler in a vertical position.
•
Make sure all parts are present and unit is assembled correctly - including the castor
wheels (these need to be pushed into place on the base of the unit)
•
Water tank: Pull the water tank out from the body of the unit and pour water into the water
tank; ensuring not to fill above the
MAX
level.
•
When humidifying, the water level must not be lower than the
MIN
water line.
•
If you want to increase the cooling effect, you can put ice or the charged ice packs into
the water tank, but be sure that by adding ice or icepacks the water level does not go
over the
MAX
limit. Empty some water if necessary.
•
Make sure filter pad is properly inserted at the back of the unit
•
Connect the power plug to a working socket, and then press the power button.
Note: If you want to remove the water tank, please pull out after unit has been powered-
off for 2 minutes.
CONTROL PANEL AND SETTINGS
ElectriQ SLIM30i control panel and display
•
ON/SPEED:
Press this key to turn on the device. The initial speed of the devices is medium and
turns down to low automatically after 3 seconds. The corresponding LED will be lit. It will default
to normal mode. The timer, fan direction and cooling / humidification functions are not active in
this mode. Once the unit is on, pressing this key will change the fan speed from Low >Medium
High>Strong>Low…etc. The fan speed LED will light up to the corresponding speed.
•
COOLER / AIR CLEANER:
When the unit is powered on, press this key to switch on/off the
cooling / humidification function. The pump will start and the cooling / humidification LED will
light up. Press the key again to turn it off. Unit can be used as an air cleaner only with water not
being pumped via the cooling pads.
•
SWING:
When the unit is powered on, press this key to switch on / off the left and right fan
direction adjustment function. Press this key once to turn on the swing function the LED will light
OFF: In power on state, press this key to turn off the device, and the system returns to standby.
•
