Page 8 of 14
OPERATION
This portable air conditioner boasts 3 modes: Cooling, Dehumidifying and Fan. The fan has two speeds:
high and low. Temperature range settings are: 16-31
Ԩ
. The unit will also display operating function,
temperature, fault diagnostics and protective functions on the display.
POWER BUTTON:
Press to turn the machine in and off. In the case of power on.
MODE BUTTON:
Press to change between cooling, fan and dehumidifier modes.
COOLING MODE: Cold air will be expelled through the front of the unit and hot air will be expelled
through the vent hose.
DEHUMIDIFIER MODE:
The unit should be set up without a vent hose, moisture is extracted from
the air that passes through the unit. Continuous drainage should be set up for the moisture collected
(Drainage pipe not included).
FAN MODE: No cooling effect, circulates air within the room, vent pipe not required.
UP AND DOWN BUTTONS
: These can be used to set the desired temperature between 16 – 31
Ԩ
.
Following pressing the TIMER button, they are also used to set the timer length. Press both buttons at
the same time to change the display between
Ԩ
and
Ԭ
.
FAN SPEED BUTTON:
IN COOLING AND FAN MODE: Press to change between high, medium and low fan speeds.
IN DEHUMIDIFY MODE: The fan will default to low speed and cannot be adjusted.
TIMER BUTTON
: Timer functions cannot be combined or repeated.
POWER ON TIMER:
With the appliance turned off, press the “TIMER” button to setup the power-on time. Press the UP
and DOWN buttons to adjust the duration of the timer (from 1 to 24 hours). Timer indicator turns
on. The unit will start after selected number of hours.
POWER OFF TIMER:
With the appliance running with the desired settings, press the “TIMER” button to setup the power
-
off timer. Press the UP and DOWN buttons to adjust the duration of the timer (from 1 to 24 hours).
The timer indicator will illuminate. The unit will stop after selected number of hours.
1:Swing Button 2:Timer Button 3:Fan Speed Button 4:Up button 5:Display
6:Down Button 7:mode Button 8:Sleep Button 9:Power Button
SLEEP BUTTON:
Press to turn on the sleep mode
While the sleep mode is activated in cooling mode, after one hour the desired temperature will be increased
by 1ºC, after another hour the desired temperature will increase by another 1ºC and remain at that level.
This means the unit will spend less time with the compressor running, and so run quieter.
Press the MODE button until the sleep mode indicator is illuminated, the fan speed is set to low.
Sleep mode cannot be used in dehumidifying and fan mode.
If the internal tank becomes full, the machine will turn off and sleep mode will be cancelled.
