9
GAS CONNECTION
IMPORTANT:
•
This appliance must be installed and connected in accordance with installation
guidelines and regulations in the country where it is to be used.
•
This appliance is supplied to run on LPG and natural gas. Conversion for use on LPG
and natural gases must only be undertaken by a qualified person.
•
It is the law that all gas appliances are installed by competent persons in accordance
with the current edition of the Gas Safety Installation and Use Regulations.
•
It is in your interest and that of safety to ensure compliance with the law.
•
In the UK, GASSAFE registered installers work to safe standards of practice. The hob
must also be installed in accordance with the current edition of BS 6172. Failure to
install the cooker correctly could invalidate the warranty, liability claims and lead to
prosecution.
•
Place the Bracket (B) over the holes that
match the length of the screws. There are
one set of screw holes in each corner of the
hob.
•
Slightly tighten the screw (C) through the
bracket (B) so that the bracket is attached
to the hob, but so that you can still adjust
its position.
•
Carefully turn the hob back over and then
gently lower it into the aperture hole that
you have cut out.
•
On the underside of the hob, adjust the
brackets into a position that is suitable for
your worktop.
•
Fully tighten the screws to secure the hob
into position.